Jump to content
Sign in to follow this  
GKTECH

GKTECH Exhaust parts - Dump pipes, front pipes with flex, cats and cat back systems

Recommended Posts

GKTECH Exhaust parts - Dump pipes, front pipes with flex, cats and cat back system

 

SR20DET 3" Dump pipe @ $109

sr20-dump_tb.jpg

Stainless steel 3" dump pipe to fit the SR20DET and to suit the following turbos: T25, T28, GT25, GT28, GT28RS, GT2535, GT2540 and most of the HKS SR20DET/CA18DET Bolt-on Turbochargers.. These are made out of Stainless Steel Grade 304 and are excellent value for the money. The dump pipe will help to scavenge turbo exhaust gasses and help produce faster boost, more boost and more torque by reducing obstructions in the standard dump pipe. These are all hand ported to ensure smooth flow. 100% 304 stainless steel TIG welded for durability & strength.

 

- 100% 304 Stainless steel

- 3.0mm wall thickness

- 0.5" flange thickness

- Includes require bolts and gaskets

- Fits SR20DET powered S13/180sx, S14, S15 etc.

 

FAQ's

Do you sell dump pipes to suit a high mount setup?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

Do you sell dump pipes for other cars?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

Will this dump pipe suit my turbo setup?

The dump pipes will fit any of the T2 5 bolt flange turbo’s including T25, T28, GT2860R, GT2871R, GT3071R, GT3076R etc. The dump pipes are only a direct fit when the turbo is in the standard turbo position (ie. Low mounted)

 

Will this dump pipe bolt on to my front pipe?

The dump pipes are a direct replacement of the standard item. If your front pipe fitted with your standard dump pipe, then this dump pipe will fit it. We’re yet to come across a dump pipe that isn’t made to suit the standard position.

 

Will my 02 sensor fit with this dump pipe?

Yes, the dump pipes come with an adapter to run either the skinny or fat type Nissan 02 sensor.

 

Are the required gaskets and bolts included?

Yes, the required gaskets and bolts and nuts are included in with the dump pipe.

 

Is there anything else that I need to install this dump pipe?

No, nothing else extra is needed. That said, we typically use exhaust gasket goo on the dump pipe to front pipe gasket. DO NOT use exhaust gasket goo on the turbo to dump pipe gasket as this will destroy your 02 sensor. This isn't critical, however while you're there, you might as well do it..

 

Can I install this dump pipe myself?

Yes, the installation of a dump pipe is pretty straight forward. As long as you’ve got some mechanical knowledge, you should be fine. Simply remove your old dump pipe and replace it with the new one.

 

Will I be able to run my EGR equipment with this dump pipe?

No, our dump pipes do not have the provision for the EGR equipment.

 

What sort of warranty does this dump pipe have?

The dump pipes have a 3 year replacement warranty against manufacturing defects.

 

---------------------------------------------------------------------------------------------------------------------------------------

 

S13/180sx/S14 front pipe with flex @ $149

s134-frnt_tb.jpg

3" Stainless Steel front pipe to fit the S13/180sx/S14 SR20DET. These are made out of Grade 304 Stainless Steel and are excellent value for the money. The front pipe will help to scavenge turbo exhaust gasses and help produce faster boost, more boost and more torque by reducing obstructions in the standard exhaust system. These are all hand ported to ensure smooth flow. 100% 304 stainless steel TIG welded for durability & strength.

 

- 100% 304 Stainless steel

- 3.0mm wall thickness

- 0.5" flange thickness

- Includes required bolts and gaskets

- Fits S13/180sx/S14 fitted with an SR20DET

 

- ALL NEW DESIGN WITH FLEX PIPE!!

 

---------------------------------------------------------------------------------------------------------------------------------------

 

S15 200sx/Silvia front pipe with flex @ $149

s15x-frnt_tb.jpg

3" Stainless Steel front pipe to fit S15 200sx fitted with an SR20DET. These are made out of Grade 304 Stainless Steel and are excellent value for the money. The front pipe will help to scavenge turbo exhaust gasses and help produce faster boost, more boost and more torque by reducing obstructions in the standard exhaust system. These are all hand ported to ensure smooth flow. 100% 304 stainless steel TIG welded for durability & strength.

 

- 100% 304 Stainless steel

- 3.0mm wall thickness

- 0.5" flange thickness

- Includes required bolts and gaskets

- Fits S15 200sx fitted with an SR20DET

 

- ALL NEW DESIGN WITH FLEX PIPE!!

 

FAQ's

Do you sell front pipes to suit other cars?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

What’s the difference between the S13/S14 and the S15 front pipes?

The S13, S14 and S15 front pipes are all the same in terms of the design. The only thing that varies is the bracket that goes to the gearbox. The S13 and S14 brackets are the same however with the S15 running a 6 speed gearbox, the bracket bolts on a little differently. Hence the 2 different version; S13/S14 and the S15.

 

Will this front pipe match up to my dump pipe?

The front pipes are a direct replacement of the standard item. If your standard front pipe fits with your current dump pipe, then this front pipe will fit. We’re yet to come across a front pipe that isn’t made to suit the standard position.

 

Will this front pipe match up to my catalytic converter?

The front pipes have a 3” outlet however the flange has a bit of room to move and will bolt to even your standard catalytic converter. If you are still running the standard catalytic converter, you may need to drill out the bolt holes to make it a bit wider. This is done with ease.

 

What is the reason for the flex pipe?

Most S series owners have experienced blown turbo gaskets and a lot of this is due to the amount of stress that the exhaust system puts on the manifold, turbo and dump pipe. The flex pipe absorbs a lot of the vibrations and strain that would typically be put on your gaskets.

 

Can I install this front pipe myself?

Yes, the installation of a front pipe is pretty straight forward. As long as you’ve got some mechanical knowledge, you should be fine. Simply remove your old front pipe and replace it with the new one.

 

Is there anything else that I need to install this front pipe?

No, everything required for installation is included (besides the tools, obviously)

 

---------------------------------------------------------------------------------------------------------------------------------------

 

S13/180sx/S14 dump pipe and front pipe with flex combo @ $249

 

 

s134-frdu_tb.jpg

---------------------------------------------------------------------------------------------------------------------------------------

 

S15 200sx/Silvia dump pipe and front pipe with flex combo @ $249

 

s15x-frdu_tb.jpg

FAQ's

Do you sell dump pipes to suit a high mount setup?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

Do you sell dump and front pipe combos for other cars?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

Will this dump and front pipe combo suit my turbo setup?

The dump pipes will fit any of the T2 5 bolt flange turbo’s including T25, T28, GT2860R, GT2871R, GT3071R, GT3076R etc. The dump pipes are only a direct fit when the turbo is in the standard turbo position (ie. Low mounted)

 

Will my 02 sensor fit with the dump pipe included?

Yes, the dump pipes come with an adapter to run either the skinny or fat type Nissan 02 sensor.

 

Will I be able to run my EGR gear with the dump pipe included?

No, our dump pipes do not have the provision for the EGR equipment.

 

What sort of warranty do these dump and front pipe combos have?

The dump and front pipes have a 3 year replacement warranty against manufacturing defects.

 

What’s the difference between the S13/S14 and the S15 front pipes?

The S13, S14 and S15 front pipes are all the same in terms of the design. The only thing that varies is the bracket that goes to the gearbox. The S13 and S14 brackets are the same however with the S15 running a 6 speed gearbox, the bracket bolts on a little differently. Hence the 2 different version; S13/S14 and the S15.

 

Will the front pipe included match up to my catalytic converter?

The front pipes have a 3” outlet however the flange has a bit of room to move and will bolt to even your standard catalytic converter. If you are still running the standard catalytic converter, you may need to drill out the bolt holes to make it a bit wider. This is done with ease.

 

What is the reason for the flex pipe in the front pipe included?

Most S series owners have experienced blown turbo gaskets and a lot of this is due to the amount of stress that the exhaust system puts on the manifold, turbo and dump pipe. The flex pipe absorbs a lot of the vibrations and strain that would typically be put on your gaskets.

 

Can I install this dump and front pipe combo myself?

Yes, the installation of a dump and front pipe is pretty straight forward. As long as you’ve got some mechanical knowledge, you should be fine. Simply remove your old dump and front pipe and replace it with the new items.

 

Is there anything else that I need to install this dump and front pipe combo?

No, everything required for installation is included (besides the tools, obviously)

 

---------------------------------------------------------------------------------------------------------------------------------------

 

3" Stainless Steel high flow metal cat @ $169

univ-mcat1_tb.jpg univ-mcat2_tb.jpg

The GKTECH 3" Steainless Steel high flow METAL catalytic converters will help to scavenge turbo exhaust gasses and help produce faster boost, more boost and more torque by reducing obstructions in the standard restrictive catalytic convertor.

 

- 100% 304 Stainless steel

- 3" inlet and outlet

- 270mm overall length

- Tested at 637 CFM

- Fits R32 GTS/T Nissan Skyline, S13 Silvia and 180sx, S14 and S15 200sx.

- May fit other performance vehicles

 

FAQ's

Will this fit my car?

Yes, most likely it will. Please check the length of the cat prior to ordering to be 100% sure.

 

Does the metal cat fit straight up?

No, you will need to have flanges welded on or weld this cat into your currenty system. This is not a bolt up, car specific cat.

 

Are flanges and gaskets included?

No, gaskets and flanges are not included and we do not have them available.

 

---------------------------------------------------------------------------------------------------------------------------------------

 

S13/180sx 3" Stainless Steel cat back exhaust @ $299

s13x-catb1_tb.jpg s13x-catb2_tb.jpg

 

---------------------------------------------------------------------------------------------------------------------------------------

 

S14 200sx/Silvia 3" Stainless Steel cat back exhaust @ $299

s14x-catb1_tb.jpg s14x-catb2_tb.jpg

Stainless steel 3" mandrel bent cat back exhaust to fit S14 200sx's. These are made out of Stainless Steel Grade 304 and are excellent value for the money. The 3" cat back will help to scavenge turbo exhaust gasses and help produce faster boost, more boost and more torque by reducing obstructions in the standard exhaust system. These are all hand ported to ensure smooth flow. 100% 304 stainless steel TIG welded for durability & strength.

 

- 100% 304 Stainless steel

- 0.5" flange thickness

- Includes required bolts and gaskets

- Includes removable silencer

 

FAQ's

Do you sell exhausts with different rear mufflers?

No, we only have the 1 rear muffler option and we don't do any custom work. Sorry.

 

Is this exhaust legal?

Please contact your local RTA for confirmation based on the information on this website regarding the cat back exhaust.

 

How loud is this exhaust?

The cat back exhaust is around 93db’s without the silencer fitted. With the silencer fitted the cat back exhaust is around 86db’s.

 

How low does exhaust sit?

The fitment of the cat back exhaust is quite good however please keep in mind that as with any off the shelf cat back exhaust system, there are many factors as to how the final exhaust sits. Ie. front pipe, exhaust outlet in the rear bumper etc.

 

Is the silencer removable or welded in?

The silencer is removable with 2 bolts holding it in.

 

Can you make me an exhaust to suit my car?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it and we don't do any custom work. Sorry.

 

 

---------------------------------------------------------------------------------------------------------------------------------------

 

 

HOW TO ORDER:

 

Click the link here and add the item to your cart:

 

SR20DET dump pipe: http://gktech.com.au...sp?id=SR20-DUMP

S13/180sx/S14 front pipe with flex: http://gktech.com.au...sp?id=S134-FRNT

S15 front pipe with flex: http://gktech.com.au...sp?id=S15X-FRNT

S13/180sx/S14 dump and front pipe with flex combo: http://gktech.com.au...sp?id=s134-frdu

S15 dump pipe and front pipe with flex combo: http://gktech.com.au...sp?id=s15x-frdu

3" Stainless steel metal cat: http://gktech.com.au...sp?id=UNIV-MCAT

S13/180sx 3" cat back exhaust: http://gktech.com.au...sp?id=s13x-catb

S14 3" cat back exhaust: http://gktech.com.au...sp?id=s14x-catb

 

cheers,

Greg Kruse - GKTECH

www.gktech.com.au

Share this post


Link to post
Share on other sites
Sign in to follow this  

×